Profile & position sensing
Sensors detect the vehicle before the cycle.
Touchless rollover
truck wash machine.
Brushless truck washing that
follows the vehicle profile.
High-pressure spray washing with vehicle-profile detection and programmable gantry movement, configured for your fleet.
Match the spray program to your vehicles and dirt load.
Vehicle clearance, water supply and the layout are planned for your site.
See touchless truck
washing in operation.
Watch the touchless truck and bus wash video, shown without sound.
Profile detection
and spray control.
The operating range, spray program and supporting systems are set for your fleet.
Programmed spraying
Pressure, detergent dosing, wash duration and gantry travel are set for your fleet and dirt load.
Control & options
PLC and touchscreen operation coordinate the wash. Drying and water recycling are optional.
From prewash
to air drying.
The vehicle remains parked while the mobile gantry runs the selected program.
Position & detect
Park the vehicle at the stopping position; sensors check it.
Pre-rinse
Water begins the selected surface-cleaning program.
Detergent
The dosing system applies the configured cleaning agents.
High-pressure wash
Nozzles spray around the vehicle without rotating brushes.
Final rinse
Water rinses the vehicle surfaces.
Drying option
Optional drying fans finish the wash.
Your wash bay
and its utilities.
Check the largest vehicle, gantry travel and fleet circulation alongside the water and electrical supplies. Final drawings determine the required space.
| Equipment | Touchless Rollover Truck Wash Machine |
|---|---|
| Wash format | Brush-free spraying from a moving gantry; vehicle remains parked |
| Vehicle detection | Vehicle-position and profile detection |
| Control | Siemens PLC and touchscreen; confirm supplied hardware |
| Program settings | Pressure, detergent dose, duration and gantry movement |
| Washing stages | Pre-rinse, detergent, high-pressure wash and final rinse |
| Drying | Optional; confirm hardware and electrical demand |
| Water recycling | Optional supporting equipment; confirm compatibility and scope |
| Operating protection | Emergency stop, position sensors and fault detection; confirm functions |
| Fleet & installation dimensions | Confirm the complete vehicle envelope and final layout drawings |
| Cycle, water & power requirements | Request for the selected vehicle range and program |
Published reference specifications. Final dimensions, utilities and configuration are fixed in the project drawings and quotation.
Before you
choose a touchless fleet wash.
Answers about clearance, wash capacity and installation.
How does a touchless rollover truck wash work?
The vehicle parks in a designated bay while the gantry moves along guide rails. Sensors detect the vehicle position and profile. The controller coordinates detergent application, high-pressure washing and rinsing, with drying if selected.
How is this different from a brush rollover truck wash?
This equipment cleans with water jets and cleaning agents, with no brushes touching the bodywork. A brush rollover system touches the vehicle with its brushes. The better choice depends on your vehicles' bodywork and how dirty they get.
Can it wash full-size trucks, buses and coaches?
Vehicle compatibility depends on the chosen configuration, and clearances differ between fleets. Send complete vehicle dimensions, mirrors, roof equipment, trailers and protrusions, and ask for the approved limits in writing.
Which wash settings can be adjusted?
Water pressure, detergent dosage, wash duration, gantry movement and drying are all set in the program.
Are drying and water recycling included?
Drying and water recycling are optional and not part of the standard machine. The quotation lists what is included, with utilities and installation.
What site space should I prepare?
Request final machine dimensions and a layout for your largest vehicle. Allow for gantry travel, rail layout, overhead clearance, entry and exit, service access and drainage, and prepare foundations and utilities only to the final drawings.
What wash cycle and utility demand should I expect?
Request the wash duration, water pressure and flow, chemical dosing and total electrical demand for the chosen configuration. Include entry, positioning and exit when planning fleet throughput.
What should I send for a quotation?
Send the installation country, fleet types and dimensions, daily wash volume, typical dirt and usable site area. Include water, drainage and electrical details, plus required drying, recycling and operation options.
Compare touchless spraying with other fleet wash formats.
Compare fleet wash systems